Call us on     09 837 1174

Food Grade Lubricants

Petro-Canada offers a complete line of food grade lubricants which are environmentally friendly.  These comprise of Chain, Compressor, Gear and Heat Transfer Fluids.  As well as hydraulic, Trolley Fluids and White Mineral Oils all forming part of the Ecosia range that will help your environmental goals.

This line of food grade lubricants is specially formulated for the high demands of the food and beverage processing industry while maintaining food grade purity. Purity™ FG lubricants are fortified with special additives to protect against wear, shock loading and corrosion.  These lubricants are highly resistant to the harsh conditions found in most food and beverage processing plants, including high pressure water sprays and water contamination, exposure to fats, acids, cleaning and sanitizing solutions. 

As well as being registered NSF H1 they are registered in New Zealand as MAF C15. These specially formulated Purity™ Food Grade lubricants will fit perfectly into any HACCP (Hazard Analysis Critical Control Point) and GMP (Good Manufacturing Practice) plans.

Read more information and data sheets by clicking on the products below.
PURITY FG CHAIN FLUID LIGHT

PURITY FG CHAIN FLUID LIGHT

This fluid is used to lubricate all types of drive and conveyor chains, as well as bearings in the food industry.
Enquire
PURITY FG CHAIN FLUID HEAVY

PURITY FG CHAIN FLUID HEAVY

This is a heavier chain fluid for use on chains used in the food industry needing a higher viscosity lubricant
Enquire
PURITY FG SPRAY AEROSOL CANS

PURITY FG SPRAY AEROSOL CANS

This fluid is a mullti-purpose lubricant packaged in an aerosol can especially for the food processing industry.
Enquire
PURITY FG COMPRESSOR FLUIDS

PURITY FG COMPRESSOR FLUIDS

These fluids lubricate air compressors and vacuum pumps used for producing, manufacturing, packaging, preparing food and food packaging.
Enquire
PURITY FG00 GREASE

PURITY FG00 GREASE

This 00 grease provides outstanding lubrication and pumpability over a wide range of temperatures, resistance to water washout and protection of gears and bearings from wear and corrosion.
Enquire
PURITY FG2 GREASE

PURITY FG2 GREASE

Purity FG2 grease is an advanced food grade grease formulated specifically for the food industry.
Enquire
PURITY FG2 WITH MICROL GREASE

PURITY FG2 WITH MICROL GREASE

Purity FG2 grease is an advanced food grade grease formulated specifically for the food industry.
Enquire
PURITY FG2 SYNTHETIC GREASE

PURITY FG2 SYNTHETIC GREASE

This is an advanced food grade grease formulated for the toughest food processing applications.
Enquire
PURITY FG2 EXTREME GREASE

PURITY FG2 EXTREME GREASE

This heavy duty grease is formulated for low to medium speed, heavily loaded industrial bearings operating under severe conditions.
Enquire
PURITY FG2 CLEAR GREASE

PURITY FG2 CLEAR GREASE

This colorless grease delivers outstanding performance under highly demanding conditions of food processing and beverage operations.
Enquire
PURITY FG EP GEAR FLUIDS (100, 150, 220, 320, 460)

PURITY FG EP GEAR FLUIDS (100, 150, 220, 320, 460)

These food grade EP gear fluids are formulated to deliver the exceptional, longer lasting protection of gear drives used in food machinery processing.
Enquire
PURITY FG EP GEAR FLUIDS WITH MICROL (100, 150, 2200)

PURITY FG EP GEAR FLUIDS WITH MICROL (100, 150, 2200)

This food grade EP gear fluid delivers the additional protection of MICROL to protect the lubricant and reduce product degradation caused by microbes.
Enquire
PURITY FG SYNTHETIC EP GEAR FLUID 220

PURITY FG SYNTHETIC EP GEAR FLUID 220

This food grade EP gear fluid provides outstanding lubrication in food processing applications running under heavier loads or subject to high or low temperature extremes.
Enquire
PURITY FG HEAT TRANSFER FLUID

PURITY FG HEAT TRANSFER FLUID

This fluid is a food grade heat transfer fluid formulated for use in non-pressurized, liquid phase, closed heat transfer systems operating with bulk temperatures up to 326 degrees Celsius.
Enquire

PURITY FG SEAMER-E-FLUID

This fluid was developed for use in high speed continuous lubrication seaming units where contamination of the oil with water and sugar may occur.
Enquire
PURITY FG AW HYDRAULIC FLUIDS (32, 46, 68, 100)

PURITY FG AW HYDRAULIC FLUIDS (32, 46, 68, 100)

These fluids are high grade lubricants formulated to deliver exceptional, long lasting protection in hydraulic systems used in food processing and pharmaceutical plants.
Enquire
PURITY FG AW HYDRAULIC FLUIDS (32, 46, 68, 100) WITH MICROL

PURITY FG AW HYDRAULIC FLUIDS (32, 46, 68, 100) WITH MICROL

The addition of Microl to these advanced food grade hydraulic fluids prevents product degradation from microbes.
Enquire
PURITY FG TROLLEY FLUID

PURITY FG TROLLEY FLUID

This fluid is specially formulated to lubricate hooks and trolley systems in meat processing plants.
Enquire
ROTARY COOKER FLUID

ROTARY COOKER FLUID

This fluid is designed for the lubrication of continuous rotary cookers and sterilizers, and similar applications operating under high temperature and high humidity conditions.
Enquire
PURITY FG WHITE MINERAL OILS (10,15,35,40,68 & 90)

PURITY FG WHITE MINERAL OILS (10,15,35,40,68 & 90)

These ultra pure, food grade white mineral oils are specially formulated for food processing and agricultural industries.
Enquire